A COLORBOND® steel fence was designed and engineered to last with both neighbours in mind. The beautiful steel fence is oven baked by BHP Steel on Zincalume/Galvanised steel base to give a strong, durable finish that won't peel, flake, chip or crack. The COLORBOND® panels are a standard 2370mm width, available in 900mm, 1200mm, 1500mm and 1800mm fence heights.
You receive the same profile on both sides of the fence. By selecting a COLORBOND® fence you are ensured that both you and your neighbour will equally enjoy the same attractive view of the fence. It puts an end to the neighbourhood complaints on who gets the good side.
COLORBOND® fences are available in the largest range of COLORBOND® colours. You can choose a range of contrasting colours to make a feature back drop to highlight the colours of your flowers, trees and shrubs. The colours you choose can also be mixed and matched to allow contrasting posts and rails. Posts and rails are now available in Black.
 |
 |
 |
 |
 |
Willow |
Bluestone |
Boundary |
Domain |
Estate |
 |
 |
 |
 |
 |
Evergreen |
Harvest |
Hedge |
Meadow |
Redoak |
 |
 |
 |
 |
 |
Riversand |
Summershade |
Teatree |
Terrace |
Eclipse posts rails only |
Above are a small variety of colours available for your COLORBOND® fence! To discuss the appropriate colours for your requirements contact our office, our experienced staff are ready to be of assistance.
The COLORBOND® steel fences are designed with increased strength compared to that of a normal metal fence. It will suit most wind conditions and will cope more than adequately with the usual hard knocks a fence must stand up to.
The toughness of a COLORBOND fence and the close fitting posts and rails means that you are assured privacy. With panel's 1.8metre (6ft high), you can create a perfect screen on a street front or between neighbouring gardens. Single and double gates can be supplied on request.
Gate sizes are available to easily assemble a complete gate on site.
A standard single sheet gate is 900mm wide (rails cut at 800mm + the two 50sq gate styles. Allow 920mm between gate posts, the extra 20mm being for hinge and latch gap.
Larger gates can be made by using 2 sheets and longer rails. By overlapping the 2 sheets the following sizes can be made without cutting a sheet. 1165mm, 1290mm, 1420mm, 1540mm and 1670mm sheet stiffeners are available for odd size gates where a sheet has to be cut, this will cover the cut edge. Any gate requiring more than 2 sheets should be constructed with a welded frame. To determine the distance between double gateposts, add together the length of the two leaves and add 30mm for hinges and latch gaps.
Top |
